PingOmniNetwork tools

Online traceroute

See the path to a destination, hop by hop, and where responses stop. Run it from our server or from other countries. Free, no sign-up.

Traceroute

Best for: Seeing the path to a destination and where responses stop.

A name like example.com, or an address like 93.184.215.14.
More options
TCP probes often get further through firewalls that drop ICMP.

Runs from our server, over IPv4.

Results appear here after you press Run traceroute.

What it does

Traceroute shows the routers between a starting point and a host, with the time to each one. It helps you see which network a problem sits in.

Under More options you can use TCP probes to a port. They often get further through firewalls that drop ICMP.

How to read the result

Hop
One router on the path. Each line is one step further from the start.
Time per hop
How long that router took to answer. A rise that carries on to all later hops suggests real delay at that point.
* or no answer
That router did not reply. If later hops still answer, it is usually only ignoring these probes, not a fault.

Common questions

Does a line of stars mean the network is broken?

Not by itself. Many routers do not answer traceroute. It only points to a problem if every hop after it also stays silent and the host cannot be reached.

What is the difference between traceroute and MTR?

Traceroute shows the path once. MTR repeats the test and counts loss and delay at each hop, which is better for problems that come and go.

Why does a hop in the middle show high delay?

Routers often answer probes slowly while still forwarding traffic quickly. If the later hops are fast again, that hop is not the cause.

Should I use ICMP or TCP?

Start with ICMP. If the trace stops early, try TCP to the port the service uses, usually 443 for a website.

Check it around the clock.

These tools check once. PingOmni Monitor checks your sites, certificates, domains and servers around the clock, as often as every 30 seconds, and tells you the moment one fails. Free for 30 monitors, with no card.